BESOIN DAIDE POUR SCX10!
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
BESOIN DAIDE POUR SCX10!
jai commendé le scx10 et jai des question pour commender sa sur horizonhobbie.com :
1: jveu une manette neuve 5 channel avec receiver pas trop cher.
2: un servo asser fort avec METAL gear pas trop cher.
3: une batterie qui dure assez longtemp (pas de lipo) pas trop cher.
4: un esc avec reverse pour un crawler scx10 pas trop cher.
5: un moteur pour mon crawler scx10 pas trop cher.
merci pour vos suggestion.
1: jveu une manette neuve 5 channel avec receiver pas trop cher.
2: un servo asser fort avec METAL gear pas trop cher.
3: une batterie qui dure assez longtemp (pas de lipo) pas trop cher.
4: un esc avec reverse pour un crawler scx10 pas trop cher.
5: un moteur pour mon crawler scx10 pas trop cher.
merci pour vos suggestion.
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
-
- Mordu Ultra Expert
- Messages : 285
- Inscription : 12 mars 2010, 16:23
- Localisation : Ste-Anne-des-Plaines
Re: BESOIN DAIDE POUR SCX10!
si tu veux di pas trop cher, pourquoi tu as pas commender le scx10 rtr plutot qu'en kit ya comme 30 ou 40 $ de différence.
et pourquoi une manette 5 channel
et pourquoi une manette 5 channel
hpi savage xl 5.9cc with reverse
himoto viper sxt 3.0cc
himoto viper sxt 3.0cc
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
Re: BESOIN DAIDE POUR SCX10!
en kit car jveu le monter moi meme. 5 channel, 1 pour avancer, 2 pour reculer, 3 pour un winch, 4 lumiere on off, 5 winch arriere.
quand je dis pas trop cher cest:
manette et receiver max 100$
servo METAL gear max 75$
esc crawler scx10 max 75$
moteur scx10 max 50$
batterie (pas de lipo) max 50$
cest sa le max que je paye!
quand je dis pas trop cher cest:
manette et receiver max 100$
servo METAL gear max 75$
esc crawler scx10 max 75$
moteur scx10 max 50$
batterie (pas de lipo) max 50$
cest sa le max que je paye!
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
Re: BESOIN DAIDE POUR SCX10!
si tu veux avoir du pas chere vas sur
hobbyking.com
hobbyking.com
-
- Mordu Super Expert
- Messages : 227
- Inscription : 25 oct. 2010, 10:11
- Localisation : Mercier
Re: BESOIN DAIDE POUR SCX10!
ta pas besoin dun channel pour avancer et dun autre pour reculer...DriftKing#01 a écrit :en kit car jveu le monter moi meme. 5 channel, 1 pour avancer, 2 pour reculer, 3 pour un winch, 4 lumiere on off, 5 winch arriere.
quand je dis pas trop cher cest:
manette et receiver max 100$
servo METAL gear max 75$
esc crawler scx10 max 75$
moteur scx10 max 50$
batterie (pas de lipo) max 50$
cest sa le max que je paye!
1 avance recule
2 steering
3 lumieres
4? winch (les winch vienne pas avec leur propre petite manette ?)
si tu depasse 3-4 channels, jpense que tu tombe dans les manettes d'avion(stick radio)
Team Losi LST2
Team Losi XXL
Axial SCX10 Honcho
Team Losi XXL
Axial SCX10 Honcho
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
Re: BESOIN DAIDE POUR SCX10!
jai pas de carte de credit
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
-
- Mordu Ultra Expert
- Messages : 285
- Inscription : 12 mars 2010, 16:23
- Localisation : Ste-Anne-des-Plaines
Re: BESOIN DAIDE POUR SCX10!
si tu veux, il vende des winchs wearless pour les rc, ta un petite manette a part, pour sortir ou rentrer le cable.
http://cgi.ebay.ca/RC4WD-Bulldog-9300XT ... 6233wt_932
et pourquoi un winch en arrière, c'est rare que tu winch du cul pour grimpé en crawler.
http://cgi.ebay.ca/RC4WD-Bulldog-9300XT ... 6233wt_932
et pourquoi un winch en arrière, c'est rare que tu winch du cul pour grimpé en crawler.
hpi savage xl 5.9cc with reverse
himoto viper sxt 3.0cc
himoto viper sxt 3.0cc
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
Re: BESOIN DAIDE POUR SCX10!
jai pas de carte de credit pour commendé de ebay mais 3 channel devrait sufir un winch, a larriere cest pour si mon frere est coincé et que moi chui en haut je laccroche et je le tire jusqu'en haut!
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
-
- Mordu Ultra Expert
- Messages : 285
- Inscription : 12 mars 2010, 16:23
- Localisation : Ste-Anne-des-Plaines
Re: BESOIN DAIDE POUR SCX10!
met l'autre winch sur l'autre crawler!!!
horizon hobby c'est américain, tu paye comment si tu as pas de carte de crédit
horizon hobby c'est américain, tu paye comment si tu as pas de carte de crédit
hpi savage xl 5.9cc with reverse
himoto viper sxt 3.0cc
himoto viper sxt 3.0cc
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
Re: BESOIN DAIDE POUR SCX10!
ouin mais lui yen aura pas je le connais!
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
- Taponeux
- Mordu Ultra Expert
- Messages : 286
- Inscription : 26 août 2010, 18:55
- Localisation : Québec la ville!
Re: BESOIN DAIDE POUR SCX10!
euh..et SCX10 ca va dans la rection crawler et scales non?
Axial SCX 10 short wheelbase
Tamiya TA-05 IFS
Ofna Hyper 10TT
Losi Micro rock Crawler
Losi Micro Highroller
Tamiya TA-05 IFS
Ofna Hyper 10TT
Losi Micro rock Crawler
Losi Micro Highroller
-
- Mordu Hyper Expert
- Messages : 581
- Inscription : 23 déc. 2010, 19:47
- Localisation : montreal
Re: BESOIN DAIDE POUR SCX10!
bin oui chu meme pas a bonne place. alain tu peut le transféré svp.
DÉPASSE MOI SI TU PEUX!!!
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
tamiya tt01D
bycmo impreza
losi strike 2WD
tamiya tt01E
losi micro crawler 1/24 stock pour l'instant
axial scx10 honcho kit
hpi sprint 2
- Jordan10
- Mordu Ultra Expert
- Messages : 402
- Inscription : 29 nov. 2010, 17:54
- Localisation : Chicoutimi,Saguenay(québec)
Re: BESOIN DAIDE POUR SCX10!
Taponneux a raison tes dans section off-road la
Vieux Nikko qui roule pareil:O(celle qu'on voit sur la photo)
Traxxas Rustler C débile raide
Traxxas Rustler C débile raide
Re: BESOIN DAIDE POUR SCX10!
Voilà ces fait
OFF-ROAD
1-TEAM MAGIC E4FSC1 SEDAN RUNNER
2-TEAM MAGIC E4FSC1 DRIFT RUNNER
3-XRAY-XB8 (ÉLECTRIQUE)
4-HYPER 10SC SPEED PASSION/MOTEUR 2200KV 4S
5-BAJA 5B SS 26cc
6-BAJA 5B SS 29cc
HYPÉRION ALL THE WAY
1-TEAM MAGIC E4FSC1 SEDAN RUNNER
2-TEAM MAGIC E4FSC1 DRIFT RUNNER
3-XRAY-XB8 (ÉLECTRIQUE)
4-HYPER 10SC SPEED PASSION/MOTEUR 2200KV 4S
5-BAJA 5B SS 26cc
6-BAJA 5B SS 29cc
HYPÉRION ALL THE WAY
- Taponeux
- Mordu Ultra Expert
- Messages : 286
- Inscription : 26 août 2010, 18:55
- Localisation : Québec la ville!
Re: BESOIN DAIDE POUR SCX10!
ok..si t'as pas de cartes de crédit, j'imagine que tu vas prendre tes trucks dans un hobby shop...
Moteur, le axial 27T vaut entre 15 et 20$ il me semble..
Pour un servo metal gear, si t'as pas de carte de credit, va probablement falloir que tu paye le gros prix...moi j'ai un savox 1256TG, ca a du torque en fou et c'est des gears en titane..mais c'est un beau 100$...
Pour le ESC, ya le Axial AE-1, qui n'as pas de drag brake il me semble mais qui vaut 50$ et le EA-2 qui a du drag brake et qui est programmable mais qui vaut environ 100$
Pour la manette...je t'aurais dit commande toi une chinoise mais bon...pas de carte de credit...moi j'irais avec un traxxas 4 links environ 110$...
c'est pas mal ca!
Moteur, le axial 27T vaut entre 15 et 20$ il me semble..
Pour un servo metal gear, si t'as pas de carte de credit, va probablement falloir que tu paye le gros prix...moi j'ai un savox 1256TG, ca a du torque en fou et c'est des gears en titane..mais c'est un beau 100$...
Pour le ESC, ya le Axial AE-1, qui n'as pas de drag brake il me semble mais qui vaut 50$ et le EA-2 qui a du drag brake et qui est programmable mais qui vaut environ 100$
Pour la manette...je t'aurais dit commande toi une chinoise mais bon...pas de carte de credit...moi j'irais avec un traxxas 4 links environ 110$...
c'est pas mal ca!
Axial SCX 10 short wheelbase
Tamiya TA-05 IFS
Ofna Hyper 10TT
Losi Micro rock Crawler
Losi Micro Highroller
Tamiya TA-05 IFS
Ofna Hyper 10TT
Losi Micro rock Crawler
Losi Micro Highroller