Compatibilités lipo

[Redato35]

Bonjour ! Voila j'ai commander une batterie 3-cell 24 C 4000 Mrh 11,1v .. seulement voila j'ai un xl-5 esc ...
Le soucis c'est que dès que je la branche le xl5 Ce met en sécu ! Et il bien compatible ? J'ai chercher un peu sur le net et apparemment le max pour ce boîtier serai de 7,4v (2c) ... j'ai donc fait un mauvais choix ? Que doit-je faire pour ne pas trop dépenser d'argent ? Reprendre une autre batterie ? Ou changer pour un xl3 compatible avec la batterie ?
Merci pour vos réponse

[Redato35]

Voici la configuration moteur à charbon titan 12t 550 charbon et xl5-esc

[Alain]

Verify that Low-Voltage Detection is DISABLED:

1. Turn on the transmitter (with the throttle at neutral).

2. Connect a fully charged battery pack to the speed control.

3. Press and release the EZ-Set button to turn the speed control on. If the LED is solid red, then the Low-Voltage Detection is DISABLED (not safe to use LiPo batteries). If the LED is solid green, then Low-Voltage Detection is ACTIVATED.

To activate Low-Voltage Detection (LiPo setting):

1. Make sure the LED on the speed control is on and red.

2. Press and hold the EZ-Set button for ten seconds.


The LED will turn off and then light green. Also, a "rising" musical tone will be emitted from the motor on brushless equipped models. Brushed models equipped with the XL-5, EVX-2, and XL-2.5 will beep twice.

3. Low-Voltage Detection is now ACTIVATED.

To disable Low-Voltage Detection (NiMH setting):

1. Make sure the LED on the speed control is on and green.

2. Press and hold the EZ-Set button for ten seconds.


The LED will turn off and then light red. Also, a "falling" musical tone will be emitted from the motor on brushless models. Brushed models equipped with the XL-5, EVX-2, and XL-2.5 will beep three times.

3. Low-Voltage Detection is now DISABLED.

[Alain]

https://traxxas.com/support/Programming ... ed-Control" onclick="window.open(this.href);return false;