D8T en construction !

Discussions générales
Cloé
Mordu Expert
Mordu Expert
Messages : 53
Inscription : 24 janv. 2012, 22:54
Localisation : La Baie , Saguenay

D8T en construction !

Message par Cloé »

Bonjour a tous,

J'Ai besoin de votre aide j'ai monté un D8T il presque terminé !! J'ai reçu mes servo aujourd'hui des savox Savox SC-1268SG High Tourque Digital HV Servo .11/361oz et Savox SC-1267SG Super Speed Steel Gear HV Servo .09/291. Me manque seulement la lipo les faire marcher. Mon problème j'ai trouvé aucune lipo qui entre dans le case!!! Il mesure 30mm x 45mm x 25mm. Avez-vous une idée ?
Pièces jointes
d8t.jpg
Summit 1/10
Rustler VXL
Fiesta Ken Block VXL
HPI Savage Flux HP
Losi 810
HB D8T
Avatar de l’utilisateur
Alain
Administrateur du site
Administrateur du site
Messages : 7997
Inscription : 26 juil. 2007, 13:58
Localisation : Trois-Rivières
Contact :

Re: D8T en construction !

Message par Alain »

Vas-y avec une bonne LiFe à la place. Tu auras beaucoup moins de problèmes !

http://www.teamassociated.com/reedy/parts/details/638/" onclick="window.open(this.href);return false;
Image


High capacity in a compact package! Reedy's 1700mAh LiFe receiver battery is perfect for hobbyists or racers who want long-lasting receiver and servo power for their nitro-powered vehicles.

A full 1700mAh capacity is perfect for racers that require one-hour plus run times while providing voltage output similar to that of NiMH batteries. And unlike with LiPo receiver batteries, no unreliable voltage regulators are required!

Specifications:
Length: 54.75mm
Width: 31.0mm
Height: 31.0mm
Weight: 87g
Alain Lizotte
http://www.lemordudurc.com

-------------------------
Team Associated RC8.2 Factory Team
Team Associated RC10T4 Factory Team
-------------------------

ImageImage
-------------------------
Avatar de l’utilisateur
lennybigblock
Mordu Ultra Expert
Mordu Ultra Expert
Messages : 423
Inscription : 05 mars 2010, 22:51

Re: D8T en construction !

Message par lennybigblock »

crime j espere que tu vas venir a la piste ici a ste ambroise !!!!

http://www.youtube.com/watch?v=ev7n1j2i ... plpp_video" onclick="window.open(this.href);return false;
LOSI 2.0 T BCE
LOSI 2.0 BCE
RUSTLER VLX MOD
BONITO
NOVAROSSI 4BTTS
M11X
Hitec 7950 et 7940
RE10-RE11-RE12
Cloé
Mordu Expert
Mordu Expert
Messages : 53
Inscription : 24 janv. 2012, 22:54
Localisation : La Baie , Saguenay

Re: D8T en construction !

Message par Cloé »

Alain a écrit :Vas-y avec une bonne LiFe à la place. Tu auras beaucoup moins de problèmes !

http://www.teamassociated.com/reedy/parts/details/638/" onclick="window.open(this.href);return false;
Image


High capacity in a compact package! Reedy's 1700mAh LiFe receiver battery is perfect for hobbyists or racers who want long-lasting receiver and servo power for their nitro-powered vehicles.

A full 1700mAh capacity is perfect for racers that require one-hour plus run times while providing voltage output similar to that of NiMH batteries. And unlike with LiPo receiver batteries, no unreliable voltage regulators are required!

Specifications:
Length: 54.75mm
Width: 31.0mm

Je l'avais vue celle-la mais elle ne rentre pas ds le case :-(
Height: 31.0mm
Weight: 87g
Summit 1/10
Rustler VXL
Fiesta Ken Block VXL
HPI Savage Flux HP
Losi 810
HB D8T
Mercierd
Mordu Confirmé
Mordu Confirmé
Messages : 18
Inscription : 25 févr. 2011, 08:23
Localisation : Sherbrooke

Re: D8T en construction !

Message par Mercierd »

Salut

la LIPO ROBITRONIC entre dans le D8T . c est pratiquement la seule qui entre dans le petit compartiment du HB.

Robitronic 2S LiPo Receiver Battery w/JST Connector (7.4V/1500mAh)
This is the Robitronic 2S LiPo Receiver Battery. This battery is recommended for any nitro application that requires a JST connector. This battery is also one of the few LiPo packs that will fit in the Hot Bodies D8 and D8T vehicles without modification to the radio tray!

Dimensions: 50x28x23mm


http://www.amainhobbies.com/product_inf ... 4V-1500mAh" onclick="window.open(this.href);return false;

A+
Cloé
Mordu Expert
Mordu Expert
Messages : 53
Inscription : 24 janv. 2012, 22:54
Localisation : La Baie , Saguenay

Re: D8T en construction !

Message par Cloé »

Merci beaucoup !! :-D :D
Summit 1/10
Rustler VXL
Fiesta Ken Block VXL
HPI Savage Flux HP
Losi 810
HB D8T
Répondre